Thứ Ba, 26/09/2017, 02:30:12
Internet Starts
Chào mừng Guest | Điểm Tin Mới |
Gửi Tin Nhắn Trao Đổi
200
Trạng Thái Truy Cập Website

Số người đang online: 1
Khách Xem: 1
Thành Viên: 0
Main » 2009 » Tháng 06 » 26 » The Windows Installer service could not be accessed error message when you try to install
09:03:44
The Windows Installer service could not be accessed error message when you try to install

Method 1: Use the Msconfig tool to confirm that the installer service is running

  1. Click Start, and then click Run.



    Start menu


  2. In the Open box, type msconfig, and then click OK.

    Run dialog box


  3. On the Services tab, click to select the check box that is next to Windows Installer .


    System Configuration Utility dialog box


  4. Click OK, and then click Restart to restart the computer.


    System Configuration dialog box


  5. Install Office again. When you are prompted to enter the product key, type the product key, and then click Next.
Office will be installed, and you will not be prompted for the product key when the programs start.

Method 2: Re-register Windows Installer

Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base:
322756  (http://support.microsoft.com/kb/322756/ ) How to back up and restore the registry in Windows


Note Because there are several versions of Microsoft Windows, the following steps may be different on your computer. If they are, see your product documentation to complete these steps.

To re-register Windows Installer, follow these steps.

Note If you cannot complete the following steps, go to method 3.
  1. Click Start, and then click Search.


    Start menu


  2. Click All files and folders.


    Search form


  3. In the File name box, type Msiexec.exe, and then click Search.


    Search form



  4. After the search is complete, make a note of the location of the Msiexec.exe file. The location of the file should be similar to the following example:
    C:\Windows\System32



    Search Results form



  5. On the File menu, click Close to close the Search dialog box.

    File menu


  6. Click Start, and then click Run.


    Start menu


  7. In the Open box, type regedit, and then click OK.


    Run dialog box


  8. Locate and then click the following registry key:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\MSIServer


    Registry Editor


  9. In the right pane of the Registry Editor window, double-click ImagePath.

    Run dialog box
  10. In the Edit String dialog box that appears, make sure that the string in the Value data box contains the correct path for the Msiexec.exe file that you determined in step 4.

    Note The following is an example of the correct path, where drive is the drive where Windows is installed:
    drive :\Windows\System32\msiexec.exe /V


    If the Value data box does not contain the correct path, make changes to correct the path, and then click OK to close the Edit String dialog box.


    Run dialog box


  11. On the File menu, click Exit to quit Registry Editor.


    File menu


  12. Start your computer in Safe mode, and then register the Msiexec.exe file. To do this, follow these steps:
    1. Shut down your computer, and then restart your computer.
    2. Restart your computer and press the F8 key on your keyboard. On a computer that is configured for booting to multiple operating systems, press the F8 key when you see the Boot menu.
    3. Use the ARROW keys to select Safe Mode, and then press ENTER.
    4. If the Boot menu appears again, and the words "Safe Mode" appear in blue at the bottom, select the installation that you want to start, and then press ENTER.
    5. Log on to the computer.
    6. Click Start, click Run, type msiexec /regserver in the Open box, and then click OK.


      Run dialog box


  13. Shut down your computer, and then restart your computer normally.
If you still cannot install Microsoft Office successfully and you receive an error message that is similar to the message listed in the "Symptoms" section, go to Method 3.

Method 3: Try the methods that are listed in Microsoft Knowledge Base Article 319624

Try the methods that are listed in the following Microsoft Knowledge Base article:
319624  (http://support.microsoft.com/kb/319624/ ) "Windows Installer Service could not be accessed" error message when installing application

Method 4: Reinstall Windows Installer

Note This method applies to Microsoft Windows 95, Microsoft Windows 98, Microsoft Windows Millennium Edition (Me), and Microsoft Windows NT 4.0. For Microsoft Windows 2000, Microsoft Windows XP, and Microsoft Windows Server 2003, either reapply the latest service pack or repair the operating system.

To reinstall the Windows Installer, follow these steps.

  1. Click Start, and then click Run.


  2. In the Open box, type cmd, and then click OK.

    Collapse this imageExpand this image
    Run dialog box


  3. At the command prompt, type the following lines. Press ENTER after you type each line.
    cd %windir%\system32

    Command prompt window



    ren msi.dll msi.old


    Command prompt window



    ren msiexec.exe msiexec.old


    Command prompt window




    ren msihnd.dll msihnd.old


    Command prompt window



  4. At the command prompt, type exit, and then press ENTER.


    Command prompt window


  5. Restart your computer.
  6. Update the Windows Installer files to the latest version. To do so, visit one of the following Microsoft Web sites, and then download and install Windows Installer 2.0.

    Note Windows Installer 2.0 is included with Microsoft Windows XP. You do not have to perform this step if you are using Windows XP.
  7. After the installation of the Windows Installer is complete, shut down and restart your computer normally before you install
Views: 780 | Added by: phuocdat | Rating: 0.0/0
Total comments: 0
Only registered users can add comments.
[ Registration | Login ]
Khung Đăng Nhập


Tìm Kiếm Trong Blog Website
Xem Blog Website Theo Ngày Tháng
«  Tháng 06 2009  »
CNHaiBaNămSáuBảy
 123456
78910111213
14151617181920
21222324252627
282930
Đánh Giá Website
Rate my site
Total of answers: 24
Liên Kết website:

- Tin Tức Tổng Hợp
Báo PC World VietNam
Báo Tuổi Trẻ Online
- - - Nhịp Sống Số
- - - Nhịp Sống Trẻ
Tin Tức nổi bật trong ngày

- Tin Thế Giới
Tin Tức Thế Giới

- Tin Xã Hội
Đối nội - Đối ngoại
Thời sự

- Tin Văn Hóa
Thời trang
Ẩm thực
Du lịch

- Tin Kinh Tế
Tài chính - Ngân hàng
Chứng khoán
Tuyển dụng - Việc làm
Thị trường
Lao động - Công đoàn

- Tin Khoa Học - Công Nghệ
CNTT - Viễn Thông
Khoa học - Tự nhiên
Thiết bị - Phần cứng

- Tin Thể Thao
Bóng đá
Quần vợt

- Tin Giải Trí
Âm nhạc - Phim
Sân khấu - Điện ảnh
Sách báo - Văn thơ

- Tin Pháp Luật
Hình sự
An ninh - Trật tự

- Tin Giáo Dục
Học bổng - Du học
Đào tạo - Thi cử

- Tin Sức Khỏe
Làm đẹp
Tình yêu giới tính

- Tin Ô Tô - Xe Máy
Tin Tức Ô Tô - Xe Máy

- Tin Nhà Đất
Đầu tư - Quy hoạch
Không gian - Kiến trúc

Tìm kiếm Tùy Chỉnh
Email:  PhuocDat@Gmail.com - PhuocDat129@Yahoo.com
Tell: 0937 632373 - 0938 968313 - 2017
Powered by uCoz